Keep It Running Longer
Most printer failures aren't sudden — they're the result of small things nobody checked for months. A little routine upkeep goes a long way.
Pick What Needs Attention
Each guide covers what to check, how often, and what happens if you skip it.
Nozzle Cleaning & Replacement
When to clear it, and when to just swap it.
Belt Tensioning
Loose belts show up as ringing long before they snap.
Lubrication Schedule
Rails and lead screws, and what to actually use.
Firmware Updates
What changes, and how not to brick your board.
Bed Surface Care
Cleaning routines that extend a build plate's life.
Cooling Fan Maintenance
Dust buildup quietly wrecks print quality over time.
Wiring & Electrical Checks
Loose connectors are a real fire-risk factor, not just a print issue.
Storage Between Prints
What to do before leaving a printer idle for weeks.
A Reasonable Maintenance Schedule
Not everything needs weekly attention — here's what actually does.
- Wipe down the bed surface
- Check the first layer for adhesion issues
- Listen for new grinding or clicking noises
- Check belt tension on X and Y axes
- Inspect the nozzle for wear or partial clogs
- Lubricate rails and lead screws if dry
- Check all wiring connections and screw terminals
- Clean cooling fans and heatsinks
- Check for firmware updates
Not Sure Where to Start?
Tell us your printer model and how often you print — we'll point you to what matters most.
Ask a Question